Star Frontiers Wiki
Advertisement
Space Shuttle Chemical Drive

Chemical drives, commonly called chemical engines or rocket engines, are simple engines used throughout the frontier for short-range transport in-system. They function by burning chemical propellant fuel and using the resulting thrust reaction to move forward.

Despite the proliferation of ion and atomic engines, the simplicity, economy, and ease of use of chemical drives keeps them a vital part of the Frontier's economy in the modern era.

Uses[]

Chemical engines are most often used by two types of vessels: shuttles and system ships.

Shuttles[]

Shuttles are small (HS 1 or 2) ships that are generally designed to land on the surface of a planet and take off again without resorting to external fuel stores. Other shuttles may be designed for short-range transport between two space-borne facilities.

Shuttles save fuel by gliding most of the way in and either landing horizontally on a runway or switching to atmospheric mode, wherein it has flight characteristics similar to an aircar, including limited VTOL capability.[1] Most shuttles are capable of carrying a double load of fuel, allowing them to take off from planets without resorting to external boosters or fuel stores.

Landers/Orbiters[]

A Lander/Orbiter is a larger shuttle (HS 3-5) specifically built to ferry relatively large amounts of cargo, passengers or materiel between a planetary surface to orbit (a station or waiting ship) and vice-versa.[2]

On rare occasion, L/O's may be used for in-system interplanetary transport.

Pilots[]

Shuttles and Lander/Orbiters use simpler controls and are generally pre-programmed with the route and destination coordinates, allowing them to be piloted by Level 6 Technicians without levels in the Piloting Skill.[3] In piloting circles, such an uncertified pilot in legal charge of a shuttle is titled a coxswain.

System Ships[]

System Ships, also commonly known as System Haulers (the name is something of a misnomer, since not all are freighters), are spaceships designed for in-system transport or production; usually mined/refined ore, cargo/ materiel, or agricultural products. This designation is also frequently used for ships of many other designs not intended for interstellar transport.

System Ships can carry a tremendous amount of cargo at a fraction of the cost for an equivalent-sized ion- or atomic-drive ship. The down side is the extensive amount of time required for interplanetary journeys...more so when attempting to conserve fuel (meaning returning from the destination with the same load of fuel).

In addition, their simplicity of design and maintenance makes them easier to construct and operate; this is evidenced by the proliferation of Class III Ship Construction Centers.

Fuel[]

Chemical drives burn a load of fuel on every voyage, the price of which being 250 Cr x HS x # of drives. Hence, a HS:3 system scout ship with two drives would require 1,500 Cr for a load of fuel (250 x 2 x3). Fuel costs are doubled when taking off from a planetary surface due to the extra thrust required to escape a planet's gravity.

Deck Configuration[]

Almost without exception, chemical drive ships designed for landing on a planetary surface are designed with decks parallel to the thrust axis, allowing for crews and passengers to walk normally when the vessel is landed on the surface of a planet or when gliding in for landing.

Most such ships take off horizontally from a runway to conserve fuel, but by manipulating the engine nozzles and increasing fuel consumption, may perform RATO (Rocket Assisted Take-Off) and STOL/VSTOL. Landing is generally done by gliding in, but if enough fuel remains, STOL/VSTOL is also possible.

Straight VTOL is almost never done due to fuel considerations.

With system ships, decks (such as they are) are generally perpendicular to the thrust axis of the ship, but given that the ship spends a great deal of time coasting in freefall, spinning sections called "centrifugal artificial gravity decks" (also known as "grav decks") are often included in the design.

Construction Centers[]

Chemical-drive ships of any size can be constructed at Ship Construction Centers of any size, as well as at Docking Stations (as described in Zebulon's Guide to Frontier Space).

Ships equipped with chemical drives, which are designed for making planetfall,[4] can be constructed on a planet’s surface. All planets that are classified as “Industrial” in their population code are capable of producing ships equipped with Size A chemical drives (i.e. HS 1-4). Additionally, industrial worlds with orbiting Ship Construction Centers of any size can produce HS 5 chemical drives on the surface.[5]

Official Rules[]

Chemical Drives are the cheapest and simplest spaceship engines.[6] They work by igniting a chemical fuel, and propel the ship with the force of the exhaust. Liquid or solid oxygen must be carried by the rocket. Chemically driven ships must carry a lot of fuel, and cannot accelerate long enough to achieve interstellar speeds.

Any hull that is outfitted with chemical engines must have a full complement of engines for that hull. For example, a ship with a hull size of 13 needs four chemical engines. These engines are mounted at the tail of the ship, instead of away from the ship on struts.

All ships with chemical engines have an ADF of 1.[7]

Chemical Drive Fuel[]

Ships using chemical drives burn a load of fuel on every voyage, as a general rule. The cost of one load of fuel is 250 Cr x the hull size of the ship for each engine. This is doubled for shuttles when they are taking off from a planet, because of the extra thrust required to escape the gravity well.

If a chemical drive System Ship is being used on a long voyage and the crew wishes to conserve fuel, the referee may allow the players the option of traveling very slowly (a mere 10,000 km per hour or so [8]). They may then be allowed to make a return trip with the same load of fuel they started with.

Lifting Off from Planets[]

A ship with chemical drives must continually accelerate through the atmosphere to reach the speed[9] necessary to escape the planet's gravity. The ship will increase its speed by 200 meters per turn (six seconds) while it is lifting off. This is a fairly accurate abstraction of actual lift-off speeds.

The speeds a ship will have and the distance it will travel after various numbers of turns are shown on the Lift-off Table:

Lift-off Table

Turn Velocity
m/turn
Altitude
(meters)
1 200 200
2 400 600
3 600 1,200
4 800 2,000
5 1,000 3,000
6 1,200 4,200
7 1,400 5,600
8 1,600 7,200
9 1,800 9,000
10 2,000 11,000

Once the ship gets beyond the reach of anything on the ground, these calculations are not necessary. For the referee's information, though, the ship will continue to accelerate until it reaches a speed of 60,000 meters/turn,[10] after 30 minutes of acceleration. At this point, it can escape a planet with 1g of gravity and soar into space.

Costs[]

Because these engines are simple and easy to build, the cost is the same at all construction centers.

Engine Size A (HS 1-4):
Cost per Engine: 50,000 Cr
Number of Engines by Hull Size:

Hull Size Number of
Engines
Fuel
(full load)
in Cr
1 1 250
2 1 500
3 2 1,500
4 2 [11] 2,000

Note that fuel costs are doubled when taking off from a planet.


Engine Size B (HS 5-14):
Cost per Engine: 100,000 Cr
Number of Engines by Hull Size:

Hull Size Number of
Engines
Fuel
(full load)
in Cr
5 3 3,750
6 3 4,500
7 2 3,500
8 2 4,000
9 2 4,500
10 3 7,500
11 3 8,250
12 4 12,000
13 4 13,000
14 6 21,000

Note that only HS 5 ships are capable of making planetfall. Taking off from a planet’s surface doubles fuel costs.


Engine Size C (HS 15-20):
Cost per Engine: 200,000 Cr
Number of Engines by Hull Size:

Hull Size Number of
Engines
Fuel
(full load)
in Cr
15 4 15,000
16 6 24,000
17 6 25,500
18 6 27,000
19 4[12] 19,000
20 8 40,000

Notes and References[]

  1. This includes range: a shuttle commonly carries one Type 2 parabattery per hull size, and has an SEU consumption rate of (4 x HS) per km. Fewer, smaller, or more batteries may be carried, affecting range proportionately, but not affecting consumption rates.
  2. This cargo is commonly measured by Hull Size, as is the standard with freighters
  3. Knight Hawks Expanded Rules pp. 4
  4. Hull Size 1-5 only.
  5. Such worlds are treated as Class III SCCs, except for the restrictions mentioned above regarding engine and hull sizes. Such surface-based SCCs can perform regular maintenance on HS 1-5 chemical drive ships regardless of whether the ship could be built at the facilities. These facilities can also perform regular maintenance on scout-class ships (i.e. HS 3 with two atomic drives), though at x3 the time and x5 the cost.
  6. Knight Hawks Expanded Rulebook pp. 12
  7. Note that this is an effective ADF of 1. For boardgame purposes, it can be assumed that a ship with chemical engines will also have an MR of 1. Considering a Knight Hawks turn duration of 10 minutes, and given the fuel consumption rate of chemical drive ships, as described in Knight Hawks pp. 32, a chemical drive ship has a maximum of three (3) turns of thrust at 1 ADF, after this time, it cannot accelerate on the KH game board and is relegated to using MR to change facing.
  8. The 10,000 kph number is not set in stone; the velocity required depends on the specific course needed to get from Point A to Point B and the time frame required.
  9. Knight Hawks Expanded Rulebook pp. 32
  10. 67,200 meters/turn, to be more precise.
  11. Originally misprinted as "1", official errata published in Polyhedron #16
  12. Probably a typo.
Advertisement